In the water cup industry, are frosted and matte processes the same?

Answer: The answer is different

Some people think that matte and frosted are the same, but this is a misunderstanding. http://www.zhanyict.com/en/ProductsDetail-VB-10439.htmlThe effect of frosted technology is mostly matte effect, but the effect that matte technology can achieve in addition to frosted effect can also be smooth surface.

In the production and processing of water cups, there are many processes to achieve frosted effects. It is well known that the surface of the water cup adopts the powder spraying process. http://www.zhanyict.com/en/ProductsDetail-VB-10439.htmlBy adjusting the size of the spray gun nozzle, different sizes of particles are formed on the surface of the water cup, and the final frosted texture is formed after high temperature baking.

In addition to this method, there are actually many other methods. For example, the frosted effect on the surface of the plastic water cup is not only achieved through the spraying process, but also the corresponding mold position is sun-textured to achieve the frosted effect on the surface of the finished plastic water cup. http://www.zhanyict.com/en/ProductsDetail-VB-10439.htmlThe frosted effect on the surface of the stainless steel water cup can also be achieved by laser laser engraving or etching to achieve the frosted texture of the surface.

The matte process used on the surface of the water cup includes the matte effect after painting and the matte effect after powder spraying. http://www.zhanyict.com/en/ProductsDetail-VB-10439.htmlThe matte effect after painting is smooth and gives people a warm touch; the matte effect after powder spraying is rough and granular, and when you hold it, you will feel a textured feeling, with friction and no slipperiness.

Whether the matte process or frosted process is used, it has no effect on the quality of the water cup, nor will it damage the function and structure of the water cup, and it will not affect the health of drinking water because of the use of these two processes. Some friends reported that they bought a matte paint water cup, which was put aside after using it for a period of time. http://www.zhanyict.com/en/ProductsDetail-VB-10439.htmlWhen they used it again after a few months, they found that the matte paint on the surface was sticky, and it could not be changed by cleaning.

Doesn’t this affect the function of the water cup?

At present, there is a process called spraying rubber paint in the water cup spraying process. This rubber paint basically presents a matte effect, feels elastic and comfortable, but due to the material, it will become sticky after a long time of use, especially after frequent use of detergents. http://www.zhanyict.com/en/ProductsDetail-VB-10439.htmlThe stickiness can be significantly improved by boiling it in high-temperature water and then drying it. Warm reminder, please confirm whether high-temperature boiling can be used before high-temperature boiling, because not all rubber paints used by merchants can pass the high-temperature boiling test. Some water cups sprayed with rubber paint will have paint falling off when boiled in high-temperature water.

The matte effect has a glossy feel, but due to the refraction of light by the particles, the glossy effect is not as good as that of glossy paint.